Gaco Western Roofing Products
-
+
2-Part Epoxy Primer/ Filler
GacoFlex E5320 is a two-component, water-based epoxy primer that is ideal for use on most roofing surfaces including metal roofs and flashings. This easy-to-apply primer bonds to properly prepared roofing surfaces and improves adhesion of GacoFlex silicone coatings and other top coats, especially on weathered surfaces that are difficult to get completely clean.
On asphalt-based surfaces it may help prevent bleed-through, and when top coated will help prevent corrosion. When mixed with ordinary sand, it’s a masonry block filler.
-
+
2.8 Density
PremiSeal 250 is a nominal 2.5 pcf density closed cell polyurethane foam roofing system intended for use by qualified contractors trained in the processing and application of spray polyurethane foam. PremiSeal 250 provides a superior R-value of 6.3 per inch and a continuous insulation without thermal breaks. The PremiSeal roofing system provides excellent self-adhering qualities with superior wind uplift, is self-flashing, seamless and with its closed cell nature provides a durable leak resistant roofing system. Its superior strength provides excellent resistance to foot traffic and abuses. The PremiSeal 250 roofing system can be used in most retrofit or new construction applications.
General Properties:
PremiSeal 250 is a two-component one to one by volume, spray applied polyurethane foam. The PremiSeal 250 liquid A component (Iso) and B component (Resin) are mixed through specialized proportioning spray equipment to produce a fast curing rigid foam plastic insulation. PremiSeal 250 utilizes an EPA approved, zero ozone depleting blowing agent.Recommended Uses:
This product is intended for your use as a wash primer for aged EPDM surfaces. Excellent adhesion will be achieved over aged EPDM. -
+
3.0 Density
PremiSeal 300 is a nominal 3.0 pcf density closed cell polyurethane foam roofing system intended for use by qualified contractors trained in the processing and application of spray polyurethane foam. PremiSeal 300 provides a superior R-value of 6.3 per inch and a continuous insulation without thermal breaks. The PremiSeal roofing system provides excellent self-adhering qualities with superior wind uplift, is self-flashing, seamless and with its closed cell nature provides a durable leak resistant roofing system. Its superior strength provides excellent resistance to foot traffic and abuses. The PremiSeal 300 roofing system can be used in most retrofit or new construction applications.
General Properties:
PremiSeal 300 is a two-component one to one by volume, spray applied polyurethane foam. The PremiSeal 300 liquid A component (Iso) and B component (Resin) are mixed through specialized proportioning spray equipment to produce a fast curing rigid foam plastic insulation. PremiSeal 300 utilizes an EPA approved, zero ozone depleting blowing agent.
Recommended Uses:
PremiSeal 300 is a roofing system designed for use in commercial and industrial applications. Use in lieu of more traditional forms of roofing systems. PremiSeal 300 can be applied as a new system over most decking substrates or over an existing built up roofing system as a cost effective alternative to a complete tear off. PremiSeal 300 is suitable for application to most construction materials including wood, masonry, concrete, metal and most roofing board stock materials. PremiSeal 300 can be applied to clean, dry and sound roofing surfaces such as BUR, mod bit, metal, concrete, single-ply and other properly prepared roofing systems. This system will provide a seamless monolithic roof system with no joints, seams, cracks or mechanical fasteners that would allow moisture, heat or cold to enter. Additional uses of this product are as an exterior coating for industrial tanks, agricultural structures, air barrier system, etc. -
+
Flashfoam
GacoFlashFoam is a high density, 3 lb. closed cell polyurethane foam designed for use as spray-applied flashings at curbs, parapets, walls and penetrations prior to application of GacoFlex Coatings. GacoFlashFoam bonds to any shape or substrate and eliminates common sources of leaks often experienced with other flashings. It may also be used to repair existing spray foam roofing systems.
GacoFlashFoam is a high density, 3 lb. closed cell polyurethane foam designed for use as spray-applied flashings at curbs, parapets, walls and penetrations prior to application of GacoFlex Coatings.
GacoFlashFoam is a high density, 3 lb. closed cell polyurethane foam designed for use as spray-applied flashings at curbs, parapets, walls and penetrations prior to application of GacoFlex Coatings. It is packaged in a convenient self-contained kit that does not need power; it is light and portable, just carry it in one hand and spray with the other.
-
+
Gaco Wash
Part #: N/A -
+
Gaco Wash
GacoWash is a concentrated cleaning solution for roof membranes and existing waterproof systems. It is specially formulated to remove tough dirt, pollen, mildew and fungus from roof membranes and existing waterproof systems. GacoWash should always be the first step in every GacoFlex Silicone Roof Coating System.
-
+
GacoDeck Kit
GacoDeck® Kit is a water-borne, single component waterproof deck system that can be applied over plywood, concrete, metal, fiberglass and previously coated decks. The coating is designed to create a fully adhered, durable waterproof membrane that expands and contracts along with the substrate.
WARNING: DAP Dynaflex 230® referenced in the GacoDeck application video is no longer a compatible product with GacoDeck. GacoDeckFill is the only approved acrylic joint filler for the GacoDeck system.
GacoDeck Kit water-borne, single component elastomeric coatings is a high quality, waterproof deck system for balconies and rooftop decks over occupied living spaces. Acrylic polymer coating system that provides lasting surface protection. Leaves a skid resistant surface that's easy to clean with soap and water. Adheres to plywood, concrete, metal, fiberglass, previously painted or coated surfaces, etc.
-
+
GacoDeck Primer
GacoDeck Primer is a water-borne, single component elastomeric primer used for adhesion purposes before applying GacoDeck TopCoat.
GacoDeck Primer can be applied over previously coated and painted surfaces, existing waterproof deck systems and substrates in cold climate zones.
WARNING: DAP Dynaflex 230® referenced in the GacoDeck application video is no longer a compatible product with GacoDeck. GacoDeckFill is the only approved acrylic joint filler for the GacoDeck system.
-
+
GacoDeck TopCoat
GacoDeck TopCoat protects deck surfaces – including balconies, patios, roof decks, ramps and elevated walkways. Apply TopCoat over plywood, concrete, metal, fiberglass and previously coated deck systems.
GacoDeck TopCoat is a water-borne, single component elastomeric coating that incorporates ADA-compliant granules for added slip and wear resistance. The coating is designed to create a fully adhered, durable waterproof membrane that expands and contracts along with the substrate.
WARNING: DAP Dynaflex 230® referenced in the GacoDeck application video is no longer a compatible product with GacoDeck. GacoDeckFill is the only approved acrylic joint filler for the GacoDeck system.
-
+
GacoFlex 66S Tape
Part #: N/A