162 2nd Avenue, Brooklyn, NY 11215
(718) 788-6800
Mon–Thu 7am–5pm · Fri 7am–2pm · Sat–Sun closed
330 Pine Street, Bridgeport, CT 06605
(203) 900-0005
Mon–Thu 7am–5pm · Fri 7am–2pm · Sat–Sun closed
MSRP$2,292.50Public priceCONTRACTORLog in to see price ›
Available on backorder
Complete Ambit AMBI-SEAL 5.0 open-cell spray foam system. Includes the A-Side (AMBIT PMDI-ISO) and B-Side (AMBI-SEAL 5.0 resin), sold together as one set.
The Ambit AMBI-SEAL 5.0 Open-Cell Set is a complete Ambit Polyurethane AMBI-SEAL 5.0 open-cell spray foam system: the A-Side (AMBIT PMDI-ISO) and the B-Side (AMBI-SEAL 5.0 resin), matched and sold together. It is a light-density open-cell foam that air seals and insulates in one step in walls, attics and crawlspaces, built to meet the intent of residential and commercial building codes. Full specs for each side are in the A-Side and B-Side tabs.
Review both safety data sheets before handling. The A-Side contains MDI isocyanate and can cause respiratory and skin sensitization: use a supplied-air respirator when spraying, chemical goggles, chemical-resistant gloves and full skin coverage. Foam must be separated from the interior by an approved thermal barrier.
Questions about rig setup or coverage? Contact us and our team will help you dial in your system before you order. The Spray Market supplies spray foam contractors with equipment, replacement parts, chemicals and safety gear.
The AMBIT PMDI-ISO is the A-Side (isocyanate) component of AMBIT spray foam systems.
The AMBI-SEAL 5.0 resin is the B-Side component of the system. Its chemistry sets the finished foam: light-density open-cell.
| Weight | 2 lbs |
|---|---|
| Dimensions | 10 × 8 × 6 in |
| Brand | Ambit Polyurethane |
| Sold As | Set (A-Side + B-Side) |
| Foam Type | Open-Cell |
| Blowing Agent | Water (zero ODP) |
| Core Density | 0.45-0.54 lb/ft³ |
| Includes | AMBIT PMDI-ISO A-Side, AMBI-SEAL 5.0 B-Side resin |
| A-Side SKU | 59586 |
| A-Side Chemistry | Polymeric MDI (pMDI) |
| A-Side Viscosity | 200 ± 50 mPa·s |
| A-Side Specific Gravity | 1.25 |
| B-Side SKU | 59593 |
| R-Value | 4.1 @ 1" |
| Mix Ratio | 1:1 by volume |
| Fire Rating | ASTM E84 Class I (FS 15-20 / SD 350) |
| Spray Pressure | 900-1,200 psi |
| Process Temperature | 110-130°F |
Manufacturer documentation for this part and the equipment it fits. Always follow the manufacturer instructions and Safety Data Sheet before use.
Reviews
There are no reviews yet.