-
+
Agribalance
Agribalance® merges our high-performing, open-cell spray foam insulation with natural, renewable oils. This allows architects, builders, contractors, and homeowners to achieve new standards of performance, quality, and energy efficiency.
This high R-value of 4.45 at 1 inch, polyurethane insulation expands to seal cracks, gaps, and voids in attics, walls, crawl spaces, and ceilings. Agribalance is a three-quarter pound density foam that reduces air leakage by improving energy efficiency, and reducing moisture intrusion and outside contaminants such as dust, dirt, and allergens. As a result, builders can generally install smaller, more energy-efficient HVAC systems and achieve similar, or superior comfort compared to traditionally insulated structures which require a larger, less efficient HVAC system – resulting in higher energy costs.
Benefits of Agribalance:- Developed with 20% of Agri-based
- Renewable materials
- Decreases dust and air pollutants
- Maximizes energy efficiency
- Minimizes noise disturbance
- Contains no ozone-depleting chemicals, Gases, Fibers, or asbestos
Since it tightly bonds to surfaces in the attic, ceiling, and walls, extraneous noise is also minimized. Agribalance is in compliance with the International Building Code® (IBC), the International Residential Code® (IRC), and the International Energy Conservation Code® (IECC).
Agribalance is also a USDA Bio-Preferred Product and an NAHB Research Center Green Approved Product.
-
+
BASF
Part #: N/A -
+
Demilec
Part #: N/A -
+
Enertite
ENERTITE is a low-density open-cell spray applied polyurethane foam (SPF) insulation. Applied as a liquid, this water-blown foam quickly expands to many times its original size completely filling wall cavities. ENERTITE easily flows in and around difficult-to-reach areas such as pipes and wiring, creating a seamless seal.
ENERTITE can be used to improve energy efficiency or to provide a barrier against unwanted sound. When you insulate with ENERTITE, you benefit from improved energy efficiency, an affordable option for superior insulation, increased comfort, excellent sound control, healthy indoor air quality, good adherence to wall (will not sag), and an environmentally friendly product.
ENERTITE US Benefits
Superior insulation performance, Ease of application, Non-fibrous, Sound controlAPPROVALS AND CREDENTIALS:
ASTM E-84*, Listed at Intertek ETL Semko, NFPA 286 -
+
Foamsulate 50
Foamsulate 50 is a two component, light density, one to one by volume spray applied polyurethane foam. To produce Foamsulate 50 requires the use of an “A” component (ISO) and a blended “B” component (RESIN), which contains ZERO ozone depleting blowing agents, catalysts, polyols and fire retarding materials. Foamsulate 50 is an insulation system designed for use in residential, commercial and industrial applications. Use in lieu of more traditional forms of insulating materials such as fiberglass, cellulose or other loose fill products.
Typical area’s where spray polyurethane foam is applied are:
EXTERIOR WALLS,INTERIOR WALLS,VENTED ATTICS,UN-VENTED ATTIC ASSEMBLIES, BETWEEN FLOORS,CEILINGS -
+
Premium/ Accella
Part #: N/A -
+
Sealection 200
Part #: N/A -
+
SPM 200 HY
Our eco-friendly The Spray Market line of products incorporate recycled plastics and renewable oils to create high performing, closed cell, spray foam insulations.
The Spray Market can be used in commercial and residential construction, on the interior and exterior, to create a specially engineered building envelope providing an air barrier, vapor barrier, insulation, and drain plane in one application.
The Spray Market is designed to exceed future sustainability goals by giving building professionals an opportunity to gain up to 10 LEED points, while also providing a low flame spread (per ASTM E-84).
Multipurpose protection for homeownersSPM 200 HY is an innovative, spray foam solution that provides homeowners quality insulation, cost-effectiveness, sustainable environment, excellent air and moisture barriers, and energy efficiency. SPM 200 HY is uniquely formulated for sustainable residential construction and incorporates more than 20% recycled plastic bottles and renewable oils to create its high-performing, high-yield foam. To encourage use of environmentally safer and more sustainable products, SPM 200 HY is also a LEED* certification product.
Providing multipurpose protection in a single application, SPM 200 HY serves as air, water and vapor barriers all in one. By keeping out unwanted outside air and water, homeowners can enjoy comfort without worry of outside allergens and possible mold growth from moisture condensation or leakage. SPM 200 HY also provides an industry-leading flame spread rating of 0-5; which means, in case of a fire, the rate in which the flame burns and moves is slowed.
SPM 200 HY is the perfect insulation solution for homeowners as it delivers quality insulation, cost effectiveness, and energy efficiency.
-
+
SPM 200HL
SPM 200HL is an innovative, spray foam solution that provides homeowners quality insulation, cost-effectiveness, sustainable environment, excellent air and moisture barriers, and energy efficiency. SPM 200HL is uniquely formulated for sustainable residential construction and incorporates more than 20% recycled plastic bottles and renewable oils to create its high-performing, high-yield foam. To encourage use of environmentally safer and more sustainable products, SPM 200HL is also a LEED* certification product.
Providing multipurpose protection in a single application, SPM 200HL serves as air, water and vapor barriers all in one. By keeping out unwanted outside air and water, homeowners can enjoy comfort without worry of outside allergens and possible mold growth from moisture condensation or leakage. SPM 200HL also provides an industry-leading flame spread rating of 0-5; which means, in case of a fire, the rate in which the flame burns and moves is slowed.
SPM 200HL is the perfect insulation solution for homeowners as it delivers quality insulation, cost effectiveness, and energy efficiency.
-
+
SPM 50M
SPM 50M has been Demilec's flagship product for more than 20 years, and has positioned Demilec as an industry-leading spray foam insulation manufacturer. As an environmentally-friendly product, it delivers superior performance, energy savings, and is an excellent return on investment for architects, builders, contractors, and homeowners, making it the ideal choice for insulation.
SPM 50M is a cutting-edge formula of open-cell spray foam insulation, which expands 120 times its liquid volume to insulate and seal all cracks, gaps, and joints with a single application, and is easy to install and finish. It has dramatically increased energy efficiency for millions of residential and commercial property owners. This translates to a high-performing product for builders, shorter application, and finishing times for contractors, and lower energy bills for homeowners and commercial building owners.
SPM 50M is a spray-applied adhesive, which once applied, expands in place using water-blown technology, without CFCs, HCFCs, or ozone-depleting chemicals. Unlike traditional fiberglass insulation, SPM 50M will maintain its performance; time and temperature have no effect on the spray foam insulation's R-value of 3.81 at 1 inch. SPM 50M never deteriorates or decomposes. The product retains its shape and half-pound density over time, and never settles or compacts.