Home > Spray Foam Materials > Open Cell > BASF > Enertite

Enertite

ENERTITE is a low-density open-cell spray applied polyurethane foam (SPF) insulation. Applied as a liquid, this water-blown foam quickly expands to many times its original size completely filling wall cavities. ENERTITE easily flows in and around difficult-to-reach areas such as pipes and wiring, creating a seamless seal.

ENERTITE can be used to improve energy efficiency or to provide a barrier against unwanted sound. When you insulate with ENERTITE, you benefit from improved energy efficiency, an affordable option for superior insulation, increased comfort, excellent sound control, healthy indoor air quality, good adherence to wall (will not sag), and an environmentally friendly product.

ENERTITE US Benefits
Superior insulation performance, Ease of application, Non-fibrous, Sound control

APPROVALS AND CREDENTIALS:
ASTM E-84*, Listed at Intertek ETL Semko, NFPA 286

Category:
Downloadable PDF's

Specification

TYPICAL PHYSICAL PROPERTIES

Liquid Resin – As Supplied

Specific Gravity @ 70°F: 1.105
ASTM D 1638

Viscosity @ 70°F (cps): 750cps
Brookfield

As Cured

Iso:Resin Mix Ratio (vol:vol): 1:1

Density, core (pcf @ 4” lift): 0.5 (nominal)
ASTM D 1622

Open Cell Content (%): >90
ASTM D 6226

Initial k-factor (Btu in/ft2 hr °F):
0.238 (R=4.2/in) ASTM C 518
Aged k-factor (Btu in/ft2 hr °F):
0.256 (R=3.9/in) ASTM C 518
In conformance with ICC AC377

Water Absorption @ 96 hrs (vol%): >40
ASTM D 2842

ENERTITE Videos

Green House Project

The Green House Project follows the retrofit of two homes built in the 1970s, to improve energy efficiency and reduce CO2 emissions.

ENERTITE Case Studies

Des Hauts-Sommets Secondary School

WALLTITE® AND ENERTITE® are specified in the construction of a high-performance school in Quebec